MG22H40 series normally closed type high pressure two-way valve

MG22H40 series high pressure two-way valve

Type: Normally closed

Interface specifications: DN15; G1/2" (4 points); G3/4" (6 points)

Working pressure: 3 ~ 40bar (MAX 50bar)

Optional voltage: DC24V, DC12V, AC220V ~ 230V

Applications: With an expected life of millions of cycles and a response time of just a few milliseconds, this high pressure 2-way solenoid valve can be used in intensive applications and high-tech machines such as PET blowing machines or laser cutting machines, and is a perfect replacement for similar products from imported brands 321H35, 321H36.

Features: this valve adopts diaphragm seal structure, exquisite appearance, reliable quality, with high flow rate, simple structure, easy maintenance, good waterproof performance, multiple wiring directions

Product features.

1. High pressure two-position two-way solenoid valve manual operation, direction and axis coaxial, easy to operate, accurate and stable position.

2. Sliding column structure, good sealing, small size, light weight, easy to disassemble;

3. The inner bore is processed by special technology, low friction resistance, long service life.

4. No need to add lubricant.

5. Multi-site installation, easy to install and use

Installation and use.

1. Before use, please check whether the components are damaged in transportation, then install and use.

2. When installing the normally open solenoid valve for water, please note that the direction of airflow (note the "→" direction) and connection serrations are correct. The media used must be filtered with a 40μm cartridge.

3. Make sure that the installation conditions meet the technical requirements (e.g. "working pressure", "working temperature range", etc.), and then install and use.

4. Avoid using in the environment with vibration and pay attention to the anti-freezing measures in low temperature.

5. When connecting the main tube, please pay attention to ensure that the anti-leakage tape does not exceed the end face of the joint teeth, and pay attention to remove dust, wire and other stolen objects from the joint.

6. When disassembling, pay attention to dustproof, and install dustproof cover at the inlet and outlet.